electricians
How Much Does an Electrician Cost in Wyoming? (2026 Price Guide From Cheyenne to Jackson)
Wyoming electricians charge about $75 to $130 an hour in 2026, and up to $180 in Jackson. See regional rates, travel fees, and job-by-job prices for panels and more.
In This Article
How Much Does an Electrician Cost in Wyoming? (2026 Price Guide From Cheyenne to Jackson)
The same 200-amp panel upgrade that costs about $2,200 in Cheyenne can cost $4,500 or more in Jackson, and neither electrician is overcharging. Wyoming has one of the widest spreads in electrical pricing of any state, driven by the resort economy in Teton County, the energy industry in the Powder River Basin and the southwest, and the long distances between everywhere else. A price guide for Wyoming has to be a guide to regions first.
Statewide, licensed electricians charge roughly $75 to $130 an hour in 2026, with service call minimums of $100 to $200. Jackson and the Teton County market run $120 to $180 an hour, and those figures are approximate and shift with the energy sector, which pulls electricians into oil, gas, coal, and wind work whenever commodity prices rise. Rural homeowners should also budget for travel charges, which in Wyoming can be the largest single line on a small job.
This guide covers the regional rates, then the travel problem, then a job-by-job price list, then how the energy and wind industries affect residential scheduling. Licensing and inspection through the Wyoming Department of Fire Prevention and Electrical Safety come after, followed by ways to keep the bill down.
Regional Rates Across Wyoming
Cheyenne and Laramie in the southeast have the most electricians and the most competition, and rates there run $75 to $115 an hour. Cheyenne's proximity to Fort Collins and the Colorado Front Range means some Colorado contractors work in the area as well, which keeps pricing in check. Laramie adds the university's influence and a small but steady residential market.
Casper, Gillette, Rock Springs, Green River, Evanston, and Riverton are energy-economy towns where residential electricians compete with the oil, gas, coal, and trona industries for workers. Rates run $85 to $130 an hour, and scheduling can stretch during boom periods when the industrial work pays more. Sheridan and Cody run slightly lower at $80 to $115.
Jackson is its own market. Housing costs, labor costs, and demand from second-home construction push electrician rates to $120 to $180 an hour, and many Teton County electricians are booked months out. Some homeowners in Jackson hire from Idaho Falls or Driggs, ID and pay travel to save money.
The Smallest Towns
Wyoming towns of 1,000 to 5,000 people often have one electrician or none. Rates there are lower on paper at $70 to $100 an hour, but the nearest available contractor may be 60 miles away, and the trip fee changes the total.
Homeowners in these towns should build a relationship with one electrician and batch work into fewer visits.
The Travel Problem
Wyoming is the least densely populated state in the lower 48, and electricians cover territories that would span several counties elsewhere. Most set a base radius of 20 to 40 miles from their shop and bill beyond it at $1.50 to $2.50 per mile round trip or a flat trip fee of $75 to $200. A ranch 80 miles from Casper can pay $150 to $250 in travel on top of the work itself.
That makes small jobs expensive in rural Wyoming. A $200 fixture swap becomes a $400 visit once travel is added, and the arithmetic pushes rural homeowners toward bundling every electrical task into one or two visits a year.
Ask about the travel policy on the first call. Some electricians waive the fee for jobs above a certain size, and some charge less if they can schedule your job alongside another in the same area.
Typical Job Prices in Wyoming
The ranges below assume a licensed electrician, a permit where required, and a house without surprises. Jackson prices run 40% to 80% above these figures.
| Job | Typical Wyoming range |
|---|---|
| Replace a fixture or ceiling fan | $150 to $350 |
| Add a 20-amp circuit | $275 to $650 |
| Level 2 EV charger circuit | $550 to $1,500 |
| Whole-house surge protector | $325 to $600 |
| 200-amp panel upgrade | $2,200 to $4,000 |
| Generator transfer switch | $900 to $2,200 |
| Power to a detached shop or barn | $1,500 to $5,000 |
| Rewire a 1,500-square-foot house | $8,500 to $17,000 |
Shop and barn feeds are a Wyoming specialty. Ranches and rural homes across the state run power to outbuildings, well pumps, and stock tank heaters, and the long trench runs and voltage drop calculations push the job toward the top of the range. Frozen ground rules out trenching from roughly November through April in most of the state.
Generator transfer switches are common because of outages during winter storms and high wind events. A manual switch for a portable generator sits at the low end of the range, and an automatic switch for a standby unit at the high end.
How the Energy and Wind Industries Affect Your Job
Wyoming's electricians move between residential and industrial work depending on where the money is. When oil and gas activity picks up in the Powder River Basin or the Pinedale area, residential contractors in Gillette, Casper, and Rock Springs lose workers to the fields, and homeowners wait longer and pay more. When activity drops, residential availability improves.
Wind construction has added a second pull. Large wind projects in Carbon, Albany, Laramie, and Converse counties hire electricians for months at a time, and residential scheduling in Rawlins, Laramie, and Douglas slows during construction seasons.
The practical effect is that timing matters more in Wyoming than in most states. A homeowner who can schedule a panel upgrade during a slow industrial period will get faster service and often a better price.
Reading the Local Market
Ask the electrician how far out they are booked and whether that changes seasonally. An honest answer will mention the energy sector. Homeowners in Gillette who hear "three weeks in winter, six in summer" are hearing the truth about the local market.
It also helps to ask whether the company does industrial work itself. A residential shop that also takes wind or oilfield contracts will prioritize those when they come in, and a purely residential shop will not.
Licensing and Inspection in Wyoming
The Wyoming Department of Fire Prevention and Electrical Safety licenses electrical contractors, master electricians, journeymen, and apprentices statewide, and its website has a license lookup. Ask for the contractor license and the license of the electrician doing the work and check both. The state also inspects electrical work in jurisdictions that do not run their own programs, which covers most of rural Wyoming.
Cheyenne, Casper, Laramie, Gillette, and a few other cities have their own building departments and inspect within city limits. Either way, the electrician pulls the permit under their license, and the inspection is the homeowner's independent check on the work.
Permit fees run roughly $50 to $200 for residential work. An electrician who suggests skipping the permit is skipping the inspection and risking their license.
Keeping the Bill Down
Batch every small task into one visit, since the service call and travel are most of the cost of a fixture or receptacle swap. Schedule indoor work like panels for the slow season, and schedule trenching for May through October when the ground is workable.
Get three written quotes from site visits for anything over about $1,000, even if the third quote takes weeks to arrive in a market like Jackson. Each quote should itemize scope, materials, labor, travel, permit, utility coordination with Rocky Mountain Power, Black Hills Energy, or your cooperative, and exclusions. A deposit of 10% to 30% is normal, with the balance after inspection.
For more local pricing across the state, the rest of our Wyoming blog covers plumbers, HVAC contractors, and roofers, and the Wyoming electricians directory lists licensed contractors by town so you can find the closest one and ask about travel first.
Frequently Asked Questions
What do electricians charge per hour in Wyoming?
Roughly $75 to $130 an hour for a licensed electrician in most of the state, with Cheyenne and Laramie at the low end and energy towns like Gillette and Rock Springs higher. Jackson runs $120 to $180.
Why is electrical work so expensive in Jackson?
Housing and labor costs in Teton County, plus steady demand from second-home construction, push rates to $120 to $180 an hour and leave many electricians booked months out. Some homeowners hire from Idaho and pay travel.
How much do Wyoming electricians charge for travel?
Most bill $1.50 to $2.50 per mile round trip beyond a 20 to 40 mile base radius, or a flat trip fee of $75 to $200. A ranch 80 miles from the nearest electrician can pay $150 to $250 in travel per visit.
How much does a panel upgrade cost in Wyoming?
About $2,200 to $4,000 for a 200-amp upgrade in most of the state, including the permit and utility coordination. Jackson prices run higher, and older homes needing grounding work add several hundred dollars.
Who licenses and inspects electricians in Wyoming?
The Wyoming Department of Fire Prevention and Electrical Safety licenses electricians statewide and inspects work outside cities that run their own programs. Cheyenne, Casper, Laramie, and Gillette inspect within their limits.